Deity DLTX THEOS Transmitter (Global)
The Deity DLTX is a THEOS digital UHF bodypack transmitter with a locking 3-pin Lemo input and 48 V phantom power. It takes a shotgun microphone on a boom pole as well as a lavalier.
Inputs and Mic Power
The Lemo input takes a lavalier, a line-level source, or a phantom-powered shotgun microphone, with mic power set to MIC 5 V, MIC 48 V, or line. Take off any lavalier before the DLTX switches to 48 V, which restarts the transmitter. The Deity L3-Link connects an XLR microphone to the Lemo input. An analog limiter on the transmitted signal keeps peaks from clipping and leaves the 32-bit float recordings untouched.
Frequency Bands
THEOS transmits digital UHF across 550 to 960 MHz, with the band in use limited by local law. On first use, the Sidus Audio app activates the Global model and assigns the legal frequency band for its region. The phone’s GPS or a firmware update can change its frequency ranges. Because the RF is digital, the DLTX creates no intermodulation, and transmitters can sit 700 kHz apart. RF power is software selectable from 10 to 100 mW, with the choices set by the region.
Recording and Timecode
The built-in recorder writes 24-bit or 32-bit float WAV files at 48 kHz to a microSD card of up to 512 GB. It works as a backup recorder for the wireless signal, with timecode. Its self-noise (EIN) is -130 dBu, A-weighted. The DLTX generates and reads SMPTE timecode, taking it wirelessly from a Deity TC-1 or from any other generator through a jam. Its clock holds 0.25 ppm, one frame in 48 hours.
Control and Power
A full-color screen shows frequency, timecode, level, gain, and status, and the Sidus Audio app controls the DLTX remotely from a phone. It runs on AA batteries (Deity lithium iron, alkaline, 1.5 V lithium, or NiMH) or from USB-C power. In reader mode, the USB-C port opens the microSD card as a drive on a computer. The CNC-milled aluminum body weighs 125 g (4.4 oz) with battery and antenna. On a boom pole, the THEOS Boom Pole Quick Release attaches the DLTX by its belt clip to the top of the pole, where the shock mount holds it in place.
Features
- Digital UHF bodypack transmitter, 550 to 960 MHz
- Locking 3-pin Lemo input
- MIC 5 V, MIC 48 V, or line input power
- Analog limiter on the transmitted signal
- 32-bit float backup recorder, microSD up to 512 GB
- Wireless timecode sync from the Deity TC-1
- 10 to 100 mW RF power, software selectable
- Remote control in the Sidus Audio app
- Runs on AA batteries or USB-C power
- CNC-milled aluminum body











