Klover MiK 16 Parabolic Microphone
Klover’s MiK 16, a 16-inch parabolic microphone, weighs about three pounds and picks up conversation from more than 250 feet away in quiet surroundings.
It was first created for baseball stadiums, where the larger MiK 26 could block a fan’s view. The smaller dish also suits security work that calls for picking up audio discreetly.
The dish depends on the model. The handheld MiK 16 and MiK 16 Broadcast use a deeper dish with a tighter pickup pattern, very similar to the MiK 09 and MiK 26. The stationary Hard Mount and Sound Shield use the original dish, with a slightly wider pattern. Klover builds any model with either dish on request.
The Broadcast adds a plate for your electronics and a neck strap to reduce fatigue. On the stationary models, a nearly invisible mounting plate replaces the handles.
The stiff, highly reflective dish is ballistics-grade plastic, and carbon fiber parts crush on impact rather than break into sharp edges. Vibration isolation bushings keep an operator’s movement out of the audio, and yokes and handles are interchangeable. You supply the microphone: an omnidirectional or wide cardioid lapel mic up to 5/16 inch in diameter, or a cylindrical or pencil mic 3/4 to 7/8 inch in diameter.
Features
- 16-inch ballistics-grade plastic dish
- Range of 250 to 300 feet in ideal conditions
- About 18X amplification
- Handheld and stationary models
- Carbon fiber parts that safely crush on impact
- Vibration isolation bushings on attachments and handles
- Interchangeable yokes and handles
Available Options
| Model | Use | Mounting | Dish | Weight |
|---|---|---|---|---|
| MiK 16 | Handheld | Two handles, with a 1/4-20 tapped insert in the lower handle | Deep | About 3 lb |
| MiK 16 Broadcast | Handheld | A plate for mounting your electronics and a neck strap | Deep | About 4 lb |
| MiK 16 Hard Mount | Stationary | Clear acrylic plate with four 1/4-inch clearance holes | Original | About 3 lb |
| MiK 16 Sound Shield | Stationary | Clear polycarbonate dish with ten 1/4-inch clearance holes | Original | About 4 lb |











