COGA Sound BPS Battery Power System
- Smart battery cup and four-output power distribution in one compact unit
- Hard-lined TA4F or Hirose 4-pin output with battery telemetry, plus three locking DC outputs
- Swappable bag clip of your choice; Bridge Mode links units for hot swaps
From $250.00 USD
COGA Sound BPS Battery Power System
The COGA Sound BPS puts a smart battery cup and a four-output power distribution system for sound bags in one unit, not much larger than the battery itself.
A smart battery slides into the BPS, which feeds a hard-lined Output 1 cable and three locking DC jacks for Outputs 2 to 4. The input has a 6 A fuse and each output a 3 A fuse, all self-resetting. The power switch controls Outputs 2 to 4, and a jumper sets Output 1 as switched or unswitched. Output 1 carries four-wire SMBus battery telemetry, so a compatible recorder can show the battery’s cycles, voltage, time remaining, and instantaneous current draw.
The Output 1 cable comes with a TA4F or a Hirose 4-pin connector and plugs into the circuit board with a header connector, so it can be replaced in the field with no soldering. A 2 mm Allen key rides in the unit’s built-in tool storage.
Battery tabs guide the battery into place for a one-handed swap, the battery’s data display always faces up, and the BPS holds the battery firmly even when turned upside down. It takes both large and small smart batteries.
Swappable clips attach the BPS to the inside or outside of a sound bag. The Bag Anchor Clip fits bags with a receiver strap, and the Molle Clip fits K-Tek and other MOLLE bags. The Mod-U-Lox Style Clip fits Sachtler, Petrol, and Protogear bags, and the Buddy-Lok Style Clip fits ORCA bags. Each unit comes with a clip of the customer’s choice, and the others are sold separately.
Moving a jumper to Bridge Mode turns Output 4 into a daisy-chain port. A 761K-to-761K cable links two units, and a Y cable links more. Linked units share power. One battery can run several units, and a battery can be swapped, even while rolling, or fail without the units losing power.
Features
- Smart battery cup and four-output power distribution in one unit
- Hard-lined Output 1 with SMBus battery telemetry, TA4F or Hirose 4-pin
- Three locking 2.5 mm DC jacks, compatible with Switchcraft 761K
- 6 A input fuse and 3 A output fuses, all self-resetting
- Field-replaceable Output 1 cable, no soldering
- One-handed battery swaps for large and small smart batteries
- Swappable clips for the inside or outside of a sound bag
- Bridge Mode daisy chain for hot swaps and redundant power
- Carbon fiber nylon construction
Available Options
| Output Cable | Output 1 Connector |
|---|---|
| TA4F | Hicon TA4F on the hard-lined cable, with SMBus battery telemetry |
| Hirose 4-Pin | Hirose 4-pin on the hard-lined cable, with SMBus battery telemetry |
What's Included
- COGA Sound BPS with hard-lined Output 1 cable (TA4F or Hirose 4-pin, by option)
- Swappable bag clip of your choice
- 2 mm Allen key, held in the unit’s tool storage
Specifications
| Battery Input | One smart battery, max 24 V, 6 A fuse |
|---|---|
| Supported Batteries | Audioroot eSmart Li-98Wh and Li-49Wh; Audioroot eSmart Li-96Neo and Li-48Neo; Inspired Energy NH2054HD34 and ND2054HD34; Remote Audio Hi-Q 98Wh and 48Wh; RRC Power Solutions RRC2054 and RRC2054-2; Sound Devices XL-Smart Battery |
| Outputs | 4: one hard-lined cable and three locking DC jacks |
| Output 1 | Hard-lined cable with Hicon TA4F or Hirose 4-pin connector, max 24 V, 3 A fuse, four-wire SMBus battery telemetry |
| Outputs 2 to 4 | Locking DC jacks, 2.5 mm ID × 5.5 mm OD, compatible with Switchcraft 761K, max 24 V, 3 A fuses |
| Bridge Mode | Output 4 becomes a 2.5 × 5.5 mm locking DC daisy-chain port to another BPS, no input fuse |
| Fuses | Self-resetting PPTC |
| Power Switch | Controls Outputs 2 to 4, and Output 1 when set by jumper |
| Construction | Carbon fiber nylon |
| Dimensions | Height 110 mm (4.33 in), width 87 mm (3.43 in), depth 42 mm (1.65 in); 47 mm (1.85 in) deep with a clip |
