ZMT3_Front_Angled
ZMT3_TopViewZMT3_Rear_ViewZMT3_microSD_ViewZMT3_Front_ImageZMT_Battery_View

Zaxcom ZMT3

$1,775.00

Clear
SKU: ZAX ZMT3 Categories: , , , Tag:

Product Description

* Price does not include batteries and charger

The ZMT3 is an ultra small bodypack transmitter filled with Zaxcom’s Emmy Award winning Digital Recording Wireless features like NeverClip™, PowerRoll™ and ZaxNet remote control. This tiny unit will surely open the door to new ways of recording sound for television, sports, theatre and feature films.

The ZMT3 is a wide-band transmitter featuring Zaxcom’s High Density (ZHD) Modulation. The ZMT3 transmitters are also capable of running all existing mono Zaxcom modulations maintaining compatibility with all Zaxcom receivers. ZHD modulation conforms to all currently proposed FCC regulations for spectrally efficient wireless transmission.

Small and durable, it’s housed in a high strength, impact resistant nylon polymer casing with rounded edges, machined metal and rubber gaskets. ZMT runs cool, the combination of the nylon composite case and its power efficiency make the heat transfer practically non existent.

The ZMT3 works with ZaxNet, Zaxcom’s 2.4-GHz RF network that distributes remote control commands, timecode and IFB audio. With ZaxNet, one can remotely control transmitter settings such as gain, frequency channel selection, transport controls and output power levels. The ZMT3 also sends a Quality Control audio signal over ZaxNet so when micing someone you don’t have to go to the cart to hear how it sounds, you can use an ERX to listen to the mic right on the spot.

The ZMT3 can be ordered in one of two configurations:

  • ZMT3.5 – covering blocks 20 through 23 (512-614 MHz)
  • ZMT3.6 – covering blocks 23 through 26 (596 – 698 MHz)
Transmitter  
RF Modulation: Proprietary Digital Method
ZMT3.5 RF Frequency Range: 512 - 614 MHz
ZMT3.6 RF Frequency Range: 596 - 698 MHz
RF Frequency Step: 100 KHz
RF Bandwidth in ZHD48 Mode: 50 KHz
RF Bandwidth in ZHD96 Mode: 100 KHz
RF Bandwidth in XR Mode: 200 KHz
Channel Separation in ZHD48 Mode: as close as 100 KHz (receiver dependent)
Channel Separation in ZHD96 Mode: as close as 200 KHz
Channel Separation in XR Mode: 400 KHz
Antenna Connector: 50 Ω SSMA Female
Emission Designator: 180 KV2E, 100 KV2E, 50 KV2E
FCC Part: 74.861
Transmitter Audio  
Dynamic Range: 128 dB
Distortion: 0.002%
Frequency Response: Mode 0: 20 Hz to 16 kHz / T & M Mode 0.2 Hz to 16 kHz
High Pass Filter: Off or 30 to 220 Hz, Steps: 10 (6 dB Per Octave)
Mic Power: 3.3 VDC
Mic Connector: 3-Pin Micro LEMO
Input Range: -60 to -30 dBu
Mic Impedance: 6.8 k Ω
ADC Bit-Depth: 24 Bits
ADC Sampling-Rate: 48 kHz
Timecode Reader / Generator  
Timecode output: 3-Pin Micro LEMO
Clock Accuracy: 1.54 PPM (1 Frame Out in 6 Hours)
Timecode Type: SMPTE
Timecode Frame-Rates: 23.98, 24, 25, 29.97NDF, 29.97DF, 30NDF, 30DF
Internal Recording
Media: MicroSD Card (Flash Memory)
File Format: .ZAX / Converts to BWAV or MP3
2.4 GHz ZaxNet Receiver  
RF Frequency Range: 2.403 to 2.475 GHz
RF Modulation: Digital Spread Spectrum
RF Frequency Step: 0.001 GHz (1 MHz)
RF Bandwidth: 1 MHz
Channel Separation: 2 MHz
Sensitivity: -96 dBm
Physical  
Weight: 2.2 oz with Battery
Dimensions (H x W x D): 2.2″ x 1.6″ x .55″
Display: Graphic OLED
Power  
Power Output: 25 / 50 / 75 mW – Software Selectable
Battery Type: NP-50
Battery Life: Up to 5.5 Hours