Wisycom MTH410 Handheld Transmitter

$1,846.00 USD

MTH410 is a handheld transmitter especially designed for professional wireless microphone applications.


SKU: WIS MTH410 Categories: , , , Tag:


Expected availability : Summer 2019

Wisycom MTH410 Handheld Transmitter

The Wisycom MTH410 is a handheld transmitter especially designed for professional wireless microphone applications. It is very easy and quick to use thanks to OLED display and 1 joggle selector and 2 buttons for straight setup of gain and channel. It has been especially designed for robustness against noise and self-interference thanks to a dual power amplifier and a special “intermodulation cancellation” circuit. MTH410 benefits of the LINEAR technology allowing EQUALLY SPACED frequency allocation intermodulation free.

It is the only handheld transmitter able to change the modulation by software working as Wideband or Narrowband. Thanks to the LINEAR and NARROWBAND features, it allows EQUALLY SPACES frequency allocation inter-modulation free.

*Capsule not included


Switchable channels 2400 managed in 40 groups of 60 frequencies completely user customizable
Switching-window Up to 232 MHz, depending on band
Frequencies Quartz PLL frequency synthesizer circuit (25 kHz step)
Frequency error ± 2.5 ppm, in the rated temperature range
RF Power Switchable typ. 10 or 20 mW /20LmW /50 mW /100 mW note: in some countries high power can be disabled, for local norm!
Modulation Wideband/Narrowband FM, with pre-emphasis
Nominal deviation ±40 kHz Wideband, ±25kHz Narrowband
Peak deviation ±56 kHz Wideband, ±35 kHz Narrowband
Spurious emissions < 2 nW
Telemetry feature
  • TX transmits also a digitally modulated sub-carrier, suitable for:
  • tone-squelch operating
  • remote battery monitoring
  • optional PTT (push to talk) operation
Noise Reduction system
  • ENR (WisycomExtended-NR), with independent Attack-and Recovery-time, noise optimized
  • ENC (Wisycom Extended-NC), with independent Attack-and Recovery-time, voice optimized & with reduced pre-emphasys
AF bandwidth
  • 45 Hz ÷ 21 KHz (3dB),55 Hz ÷ 20 KHz (1dB) Widebandwith LPF at 20kHz
  • 45 Hz ÷ 17 KHz (3dB),55 Hz ÷ 15 KHz (1dB) Narrowbandwith LPF at 15kHz
Distortion < 0.3 % (0.15 % typ.)
SND/D ratio (Analogue)
  • typ. 115 dB(A)rms with 40 kHz deviation,typ. 121 dB (A)rms with 56 kHz deviation Wideband
  • typ. 115 dB(A)rms with 25 kHz deviation, typ. 121 dB (A)rms with 35 kHz deviation Narrowband
Audio input connector Directly interchangeable microphone-heads
Audio input level 60 dBadjustable range from -54 to +6 dBuat peak deviation (1 kHz), adj.in 1 dB steps
Max input level +6 dBu
Max sound pressure 150 dB SPL (0,5% THD), with MCM30x condenser-heads
Managing interface IrDA
  • bicolor led (red & green) on wireless power switch:
  • Wireless transmission status: GREEN on/off
  • Battery lifetime status: GREEN steady (> 25%), slowly blinking (< 25%), quickly blinking (<12%)
  • Modulation peek (if activated): RED )
  • Ptt status: RED if active
Battery lifetime indication 8 steps : 7 bars (100%-87%-75%-63-50%-38%-25%) and “empty bar” quickly blinking (12% remaining)
PTT function with optional PTT accessory
Display High contrast OLED (Organic light-emitting diode) white display (128 x 32 pixels)
Power supply 2 AA size cell(Alkaline, rechargeable NiMH or Lithium)
Power consumption [email protected] average (display off, 100mW power)
Battery life with Alkaline: approx. 7 hours @ 100mW with Lithium: approx. 7 hours @ 100mW
Temperature range -10 ÷ +55 °C
Dimensions 183 x 33 mm (length x diameter) without microphone-head
Weight Approx. 150g only body, 280 g with head MCM306, 330g with head MCM306 and batteries

Manuals & Docs

MTH410 Brochure & Tech Sheet