dpa_slimMic
dpa_slimMic3dpa_slimMic2dpa_slimMic4

DPA d:screet Slim Miniature Microphones – Legacy

From: $429.95

Clear

Wireless Adapter

Product Description

DPA d:screet Slim Miniature Microphones

This mic series is perfect for your film assignment or for any other situation where you need a completely hidden microphone. With sound on par with DPA’s legacy d:screet™ 4060 Series Omni Mics you can be sure that the d:screet™ 4160 Series Slim will not disappoint. This mic is flat and short with a cable that runs perpendicular to the sound inlet, ensuring easy mounting and a tiny footprint.

Key Features

  • Completely invisible when used with Button-Hole Mount or Concealer
  • Exceptional audio quality
  • Uniform, consistent sound between DPA mics
  • Modular adapter system fits most professional wireless systems

If choosing the Microdot version, please remember to add a Microdot adapter to your cart.

4160

Specifications

Directional pattern Omnidirectional
Principle of operation Pressure
Cartridge type Pre-polarized condenser
Frequency range 20 Hz – 20 kHz
Frequency range, ±2 dB 20 Hz – 20 kHz, 3 dB soft boost at 5 – 20 kHz
  Button-hole mount: 20 Hz – 18 kHz, 5 dB soft boost at 5 – 18 kHz
Sensitivity, nominal, ±3 dB at 1 kHz 20 mV/Pa; -34 dB re. 1 V/Pa
Equivalent noise level, A-weighted Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
Equivalent noise level, ITU-R BS.468-4 Typ. 35 dB (max. 38 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) Typ. 71 dB(A)
Total harmonic distortion (THD) < 1% up to 123 dB SPL peak, < 1% up to 120 dB SPL RMS sine
Dynamic range Typ. 100 dB
Max. SPL, peak before clipping 134 dB
Output impedance From MicroDot: 30 – 40 Ω. From DAD6001: 100 Ω
Cable drive capability Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
Output balance principle Signal balanced with DAD6001-BC XLR Adapter
Common mode rejection ratio (CMRR) > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
Power supply (for full performance) Min. 5 V to max. 50 V through DPA adapter for wireless systems, 48 V phantom power ±4 V with DAD6001 XLR adapter
Current consumption Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
Weight 8.5 g (0.3 oz) incl. Cable and MicroDot connector
Cable length 1.8 m (5.9 ft)
Cable diameter 1.6 mm (0.06 in)
Polarity Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
Temperature range -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH) Up to 90%

 

4161

specifications

Directional pattern Omnidirectional
Principle of operation Pressure
Cartridge type Pre-polarized condenser
Frequency range 20 Hz – 20 kHz
Frequency range, ±2 dB 20 Hz – 20 kHz, 3 dB soft boost at 5 – 20 kHz
  Button-hole mount: 20 Hz – 18 kHz, 5 dB soft boost at 5 – 18 kHz
Sensitivity, nominal, ±3 dB at 1 kHz 6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equivalent noise level, ITU-R BS.468-4 Typ. 38 dB (max. 40 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) Typ. 68 dB(A)
Total harmonic distortion (THD) < 1% up to 123 dB SPL peak, < 1% up to 120 dB SPL RMS sine
Dynamic range Typ. 97 dB
Max. SPL, peak before clipping 144 dB
Output impedance From MicroDot: 30 – 40 Ω. From DAD6001: 100 Ω
Cable drive capability Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
Output balance principle Signal balanced with DAD6001-BC XLR Adapter
Common mode rejection ratio (CMRR) > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter
Power supply (for full performance) Min. 5 V to max. 50 V through DPA adapter for wireless systems, 48 V phantom power ±4 V with DAD6001 XLR adapter
Current consumption Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
Weight 8.5 g (0.3 oz) incl. Cable and MicroDot connector
Cable length 1.8 m (5.9 ft)
Cable diameter 1.6 mm (0.06 in)
Polarity Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
Temperature range -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH) Up to 90%

 

Video