Audio Technica BP893 MicroEarset Omnidirectional Condenser Headworn Microphone for Wireless Systems
Audio Technica BP893 MicroEarset Omnidirectional Condenser Headworn Microphone for Wireless SystemsAudio Technica BP893 MicroEarset Omnidirectional Condenser Headworn Microphone for Wireless Systems

Audio Technica BP893 MicroEarset Omnidirectional Condenser Headworn Microphone for Wireless Systems

From: $249.00

Clear
SKU: AUD BP893 d12 Categories: , Tag:

Product Description

With its ergonomically molded earpiece and unobtrusive one-inch boom, Audio-Technicaメs BP893 MicroEarset offers inconspicuous placement along with clear, natural vocal pickup. Its lightweight low-profile design makes the microphone ideal for use in theatrical performances, houses of worship and broadcast studios.

The BP893 MicroEarset is positioned unobtrusively over the ear. Its omnidirectional miniature condenser capsule offers outstanding pickup tailored for natural vocal reproduction, with audio reproduction similar to that of a high-quality lavalier microphone. The microphone is also ideal for use in violin pickup; wear the BP893 over the ear as usual, with no need for clamps on the violin.

  • Outstanding clarity and intelligibility
  • Lightweight, ergonomic design
  • Extremely unobtrusive, 1-inch flexible boom
  • Secure over-the-ear placement
  • Extended frequency response for natural vocal reproduction
  • UniSteepᆴ filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
  • Available in black and beige
ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Omnidirectional
FREQUENCY RESPONSE 20-20,000 Hz
OPEN CIRCUIT SENSITIVITY ヨ34 dB (19.9 mV) re 1V at 1 Pa
MAXIMUM INPUT SOUND LEVEL 114 dB SPL, 1 kHz at 3% T.H.D.
SIGNAL-TO-NOISE RATIO 68 dB, 1 kHz at 1 Pa
CURRENT CONSUMPTION 0.1 mA typical at 5V (wireless only)
VOLTAGE RANGE 2.5-11V (wireless only)
WEIGHT (MICROPHONE) Microphone, boom & earpiece: 2.0 g (0.07 oz)
DIMENSIONS Microphone: 8.1 mm (0.32"") long, 2.6 mm (0.10"") diameter
Boom: 26.4 mm (1.04"") long, 1.07 mm (0.04"") diameter
CABLE 1.4 m (55"") long (permanently attached to microphone), 1.6 mm (0.06"") diameter, 2-conductor shielded cable with locking 4-pin connector (wired and cW versions)
ACCESSORIES FURNISHED BP893: AT8440 cable clip; two AT8157 windscreens; two AT8156 element covers; moisture guard; carrying case
AUDIO-TECHNICA CASE STYLE M31

Audio Technica BP893 Specifications Sheet (427K PDF)